https://nova.newcastle.edu.au/vital/access/ /manager/Index en-au 5 Dispersion behaviour in binary solid-liquid fluidised beds https://nova.newcastle.edu.au/vital/access/ /manager/Repository/uon:31095 Tue 27 Aug 2024 19:42:36 AEST ]]> Expansion behavior of binary solid-liquid fluidised bed with different solid mass ratio https://nova.newcastle.edu.au/vital/access/ /manager/Repository/uon:25529 -3 were fluidised in water. Binary experiments were carried out considering both equal and unequal solid mass ratios ranging from 0.16 to 6.0. The overall bed expansions including segregated and intermixed zones were monitored. The effect of loading pattern on bed expansion was found insignificant in a binary SLFB. In a completely segregated SLFB, bottom mono-component layer displayed a negative deviation up to 30% whereas a positive deviation up to 22% was found in top mono-component layer when compared to respective individual monocomponent SLFBs. The total bed height of binary mixture was found to be unequal to sum of expanded bed height in individual mono-component SLFB, showing either positive or negative deviations. The experimentally observed criterion of the bed independency has been tabulated. Eulerian-Eulerian (E-E) CFD simulations with kinetic theory of granular flow (KTGF) have been performed and compared with the experimental data. The CFD predictions were found to be in good agreement (within ±6 per cent deviation) when compared to experimental results.]]> Sat 24 Mar 2018 07:26:07 AEDT ]]> Expansion behaviour of a binary solid-liquid fluidised bed with different solid mass ratio https://nova.newcastle.edu.au/vital/access/ /manager/Repository/uon:32956 -3) spherical glass beads particles of diameter 3, 5 and 8 mm and water as fluidising medium with different particle mass ratios varying from 0.17 to 6.0. In the expanded bed, both segregated and intermixed zones were observed depending on the different particle diameter combinations. In a completely segregated SLFB, the bottom monosized layer exhibited a negative deviation ~23% whereas a positive deviation ~25% was found in the top monosized layer when compared with the corresponding pure monosized system. A small mixing zone spanning approximately two particle diameters thick was observed to exist even in a completely segregated SLFB for higher diameter ratio cases. A slight decrease in the mixing zone height was noted with increasing liquid superficial velocity. For lower diameter ratio cases, a relatively lager mixing zone height was observed which increased with increasing liquid superficial velocity. The bed expansion ratio was noted to decrease with increasing solid mass ratio however it increased with increase in the fluidising velocity ratio following a reasonable power law trend. The expanded bed height of the binary mixture was not entirely additive of its corresponding mono-component bed heights and both positive and negative deviations were observed. Finally, a two-dimensional (2D) Eulerian-Eulerian (E-E) model incorporating the kinetic theory of granular flow (KTGF) was used to quantify the binary system hydrodynamics. The model predicted expanded bed height agreed with experimental measurements within ±6% deviation. Presence of a mixing zone was also confirmed by the CFD model and simulated particle phase volume fraction distribution qualitatively agreed with the experimental visualisations.]]> Sat 06 Jul 2024 14:56:03 AEST ]]>